DPF Regeneration Machine

DPF Master Flash Professional PLUS

The highest quality device for regeneration of DPF/FAP/GPF/SCR filters and catalysts. Made entirely of stainless steel AISI 304, acid resistant AISI 316 and dedicated to all types of cars. The machine has a double tank capacity of 275 litres, a pressure pump capacity of up to 250 l/min and an integrated filter drying system.

DEVICE DESCRIPTION:

It uses an Italian pump with a chemical seal resistant to contamination and electronics based on components from leading European manufacturers, which guarantee the highest quality and reliability of the device. The machine can measure in dry environment (counter-pressure measurement) and has an integrated filter drying system at 70-130 degrees. The filtration system extended with a pre-filter allows for a significant extension of the main filters’ service life. The device can operate in automatic or service mode, which allows you to use the selected option independently. The hydrodynamic method used in combination with the unique, dedicated XTON DPF CLEANER chemistry removes PM10, PM2 residues.

ADDITIONAL OPTIONS:

  • automatic filter cleaning on both sides
  • second fluid circuit with additional pump
  • thermal insulation of the liquid tank
  • automatic fluid refill
  • quick-X filter clamping system

Record-breaking return on investment

Thanks to the combination of the best price/quality ratio, attractive forms of financing and the highest efficiency on the market, you will pay off the leasing instalment after only 2 services – the next ones are your pure profit!

EQUIPMENT

  • 7″ colour touch screen
  • sensors: liquid level, liquid and air temperature, pressure flow, door opening, phase loss and phase sequence
  • protections: safety switch, chamber door end protection, phase loss and phase sequence
  • filter contamination measurement system
  • stainless steel AISI 316 chamber
  • extensive 4 stage liquid filtration system
  • two heaters
  • integrated drying system with smooth temperature range from 70 to 130°C
  • cooling of the drying system
  • integrated thermal printer for printing filter parameters
  • Ethernet controller for remote diagnostics
  • set of adapters for DPF / FAP / GPF / KAT / SCR filters
  • EURO5 and EURO6 adapter
  • starter kit for consumables (filter set + 2L of detergent XTON DPF Cleaner)
  • liquid tank with capacity up to 275 litres
  • extended 12-month manufacturer’s warranty (optionally 24 or 36 months)
DPF Master Flash Professional PLUS- device for DPF regeneration

Best choice for DPF regeneration business

90% of filters regain their factory parameters. In cooperation with the regeneration center, we conducted measurement tests of filters cleaned by the DPF Master Flash machine.

400 times increased efficiency of the filter cartridges. hanks to the application of the four-stage liquid filtration system and the pre-filter we extended the life of inserts even by 400%

A special machine control system allows extending the work of one of the most expensive elements of the machine, which allows saving over 1000 EUR within 2 years.

20 minutes – average duration of DPF filter regeneration process. We have calculated the average regeneration time which takes about 20 minutes (not including the drying process).

It takes only 10 seconds to connect the filter. The innovative QuickX system makes the time of connecting the device fittings to the filter much shorter than in the case of a traditional installation.

The cost of regeneration of 1 particulate filter is less than 5 EUR. Average price of the offered services of cleaning the DPF passenger cars on the market estimated profit is 70-125 EUR net.

Technical data:

mobile app
weight
650 kg
external dimensions (l x w x h)
206 x 126 x 215 cm
chamber dimensions (l x w x h)
140 x 89 x 107 cm
tank capacity
275 liters
working pressure
6 -8 bar (90-100 psi)
VOLTAGE
3 x 400V
MAX POWER
12 kW
FREQUENCY
50 Hz
WATER CONNECTION (INLET)
1/2″
WATER CONNECTION (DRAIN)
6/4″
AIR CONNECTION
pneumatic quick coupler DN 7.2, connector
AMBIENT TEMPERATURE
5 – 35°C
NOISE LEVEL DURING OPERATION
>70 dB
LIQUID TEMPERATURE
adjustable in the range of 30 – 100 ° C
DRYING TEMPERATURE
adjustable in the range of 70 ° C – 130 ° C
OPTIMUM WORKING TEMPERATURE
38° C
DIAMETER OF PRESSURE HOSES
6/4”
PUMP CAPACITY
up to 250 l / min
LIQUID FILTRATION
4-stage liquid filtration, 100 – 3 microns – extended
AIR FLOW
up to 430 m³ / h
OVERPRESSURE
up to 370 mbar
VACUUM
up to 300 mbar
PRE-FUSE
32 A
POLLUTION MEASUREMENT SYSTEM
expressed in mbar and kPa units
DRYING SYSTEM
integrated drying system
Filter Cartridges
5 PCS
SECURITY
temperature sensor pressure sensor door opening sensor emergency safety switch liquid flow sensor
DECLARATION OF CONFORMITY

This is not your language?

Choose other language