What is the best method of DPF regeneration?+
The hydrodynamic method is the most effective. This method is based on the introduction of a cleaning agent operating at the interface to the system of the particulate filter or catalyst, this introduction takes place with appropriately selected pressure and an exact amount of the agent (this is of great importance - improper performance of these activities may lead to the displacement of the monolith, its chip damage or blockage of the measuring channel or capillary). Moreover, in this process, the pressure in the filter chamber is cyclically increased, detaching the soot and ash particles weakened in a chemical reaction and expelling them outside.
How long does the DPF cleaning process take?+
The total regeneration time of the DPF filter by hydrodynamic method depends on the type of filter and the degree of contamination. The process takes 45 minutes to 2 hours. Average time is around 60 minutes.
What consumables are needed for DPF regeneration in Master Flash Professional?+
Filters, active factor XTON DPF CLEANER, collars and silicone tubes. All consumables are available in our offer on an ongoing basis.
Should water and detergent be disposed of after regeneration?+
The detergent used to clean DPF filters is fully biodegradable and safe for health and the environment. The filters used in the machine keep the water clean. Dispose of contamination resulting from cleaning as well as used filters in accordance with local environmental regulations.
How often is DPF cleaner poured into the machine?+
Water tank capacity 277 liters.
Before regeneration, add: - 50 ml of concentrate - filter from a passenger car - 60-80 ml of concentrate - filter from a truck (depending on the filter capacity).
1L of concentrates
Is drying of the DPF filter necessary after regeneration?+
Drying is necessary. If the filter is not dried out, the car will smoke white until it is completely evaporated.
What is the drying temperature of the DPF filter?+
The drying temperature of the filter in the DPF Master Flash Professional device is adjustable in the range of 70-100 ℃, while in the DPF Master Flash Professional Plus device the range is 100-130 ℃. These parameters ensure that the liquid inside the filter is completely evaporated.
How often is the water in the DPF Master Flash Professional tanks changed/+
DPF Master Flash works in a closed circuit with 4-stage filtration from 5-300 microns.
The water is changed at the time of visible contamination, depending on:
• the type of regenerated filters (DPF / FAP / SCR / KAT) - Adblue, Eolys additives • the degree of contamination
• the capacity and surface of the filter monolith
• the frequency of water filtration replacement and mechanical pre-filter cleaning
- or the regenerated filter is flooded with oil (e.g. after a turbocharger failure). From 5 - 50 regenerated DPF filters.
What is the total cost of regenerating one DPF filter?+
The total cost of regenerating one DPF filter in a passenger car is about EUR 5, depending on the degree of filter contamination. The cost of regenerating EURO5 and EURO6 filters fluctuates around EUR 30-40.
What do we get with the DPF Master Flash Professional machine?+
In the set with the machine we get
• set of connections and adapters for filters
• EURO5 and EURO6 adapter
• starter kit: active factor XTON DPF CLEANER + set of filters
• free training at our company's headquarters
• on-line after-sales technical support
What technical requirements must be met to connect the DPF Master Flash device?+
The device requires an air compressor and a three-phase power supply to work properly.
What is the delivery time for serial production machines?+
The standard waiting time for the device is 2-6 weeks from the moment of signing the contract. Details are always discussed individually with the client.
What is the warranty for XTON devices?+
The standard manufacturer's warranty for XTON devices is 12 months. It is possible to extend it up to 48 months. This option is additionally payable.
What forms of financing are available?+
• attractive leasing from 105% (we cooperate with all leasing companies in Poland)
• advance payment: 10-30% of the contract value, payable after signing the contract for delivery
What are the transport options for the device?+
• the possibility of delivering the machine by our company
• outsourcing transport to an external company
• collection in person after prior notification
Is training in the use of the device included in the purchase price?+
Yes, the price includes one-day training at our headquarters (we can also send a technician to you after prior arrangement)
Does the price include the machine starter kit?+
Yes, we equip each device with a starter kit. The price includes complete equipment, connectors, fittings as well as a chemical agent and filters to start.
Do you offer the buyer technical support after the purchase?+
Yes, a technical consultant is available during business hours. Working hours available on the website www.xton-group.com
Are spare parts available from you without any problems as with warranty and post-warranty service?+
Parts available on a regular basis, we have been operating in the industry for 10 years, constantly providing warranty and post-warranty service. I would like to add that our machines are equipped with a remote self-diagnostic system. We can also extend the period of extended warranty care for our machines to 24, 36 or 48 months
What types of waste are generated in the remanufacturing process?+
During the regeneration process the following wastes are generated: oil wastes, oil derivatives, oily water and wastes from oil dehydration in oil separators